Tuesday, September 29
Shadow

welding inspector job

Before starting to consider technical issues, attention should be paid to the personal qualities and typical duties of a welding inspector. The Welding Inspector is the responsible person involved in determining the quality of the welds based on applicable collections of norms and rules and / or specifications. Inspectors carry out their duties in a wide variety of circumstances, which, first of all, vary depending on which organization they work for. Thus, when working with complex elements and structures, there is a need for job descriptions.

Participants in control activities may include destructive testing specialists, non-destructive testing specialists, technical inspection inspectors, military and state inspectors, representatives of the owner’s company, internal controllers, and others. In some In these cases, these specialists may consider themselves to be “welding inspectors”, since their duties include quality control of welds . The functions of a welding inspector can be divided into three categories, taking into account the following responsibilities that an inspector performs:
– The person who supervises the work

– Specialist

– A person who simultaneously performs the functions of supervision and the duties of a specialist.

Persons with various skills can be supervised, which allows them to control work of any type and in any volume. The principles of formation of groups of inspectors and the degree of their participation in events requiring different knowledge is determined by economic and technical requirements.

Specialists include individuals who, in the control process, perform a specific task or tasks. The specialist may act independently of the inspector exercising control. A non-destructive testing specialist belongs to a category that has limited responsibilities in the process of welding inspection.

In many cases, the inspector simultaneously performs the supervisory and specialist functions. At the same time, the inspector may be responsible for the overall assessment of the quality of welds at various stages of the process, as well as for performing non-destructive tests, if necessary. Customers may engage several inspectors to carry out inspections, each of which is responsible for the implementation of a certain part of the control activities.

If you want to be certified welding inspector, you can take Welding inspector CSWIP 3.0 or CSWIP 3.1

Leave a Reply

Your email address will not be published. Required fields are marked *